• New wax needs to be applied to a previously waxed surface only when a shine can no longer be buffed with a dry cloth. Apply wax every three months to a year on frequently used table tops and much less often on everything else.

• Apply the wax VERY sparingly - a little goes a long way - with a tightly woven cotton cloth like a piece of old sheet or pillow case... Remove the excess of wax and rub it out well. Only the wax in contact with the surface does any good. Though wax adheres tenaciously to almost any surface, it does not bond well to itself. When applying wax, all the excess should be removed by polishing before it has dried hard. Wax softens by the application of more wax. Therefore a new application of wax will result in the same thickness of wax you had after the prior application.

• Once the excess wax is removed, there won't be any noticeable difference in the shine, scratch resistance, or water repellency between brands.

• Leave the wax to dry as long as you can - even 24 hours. (the sheen will change from glossy to dull), then buff it for a soft shine with a clean piece of cloth.

• You will get a better result if you buff with a piece of wool, nylon or even paper towels - the trick is to generate heat. It will give a wonderful sheen.

• If your furniture just needs a lick of polish, give it one light coat from time to time.

• Try to keep a constant relative humidity in the rooms where you feature your antiques. Wood can be sensitive to excessive dry climate (e.g. winter with A/C). Cracks and other problems can occur, especially with oak. Don't hesitate to ask us if you have any questions.

• Be careful: Wax is flammable. Keep it away from children